Blade Nano QX FPV BNF Manuel d'instructions télécharger pdf (Page 16)

Display Adjustment

• Press Left or Right on the Display Button to adjust the video contrast in the headset.

• Press Forward or Back on the Display Button to adjust the video brightness in the headset.

• Press Down on the Display Button to change the video zoom in the headset. The normal

display (16:9) shows the entire image with black bars on the top & bottom. The zoom

display (4:3) maximizes the image in the headset and is used with digital head tracking.

Digital Head Tracking

• Long Press: Depressing the Display Button toggles head tracker mode (active/deactivate). With digital head tracking active,

the image will zoom in and the image will digitally pan and tilt in response to head motion.

• Short Press: Resets center reference position (both analog/digital).

Refer to the SPMVR1100 or SPMVS1100 headset manual for more information about head tracker functions.

Using the Ultra Micro FPV System

Consult local laws and ordinances before operating FPV equipment. In some areas, FPV operation may be limited or

prohibited. You are responsible for operating this product in a legal and responsible manner.

1. Power on your radio transmitter, then power on the aircraft.

2. Power on the headset to make sure the channel is clear and then the video transmitter.

3. Perform a range test before flying.

Tip: If you are prone to motion sickness, sit in a chair. If you start to suffer from motion sickness while ﬂ ying, lower your

chin against your chest.

Fly in open areas, away from people, trees, cars, and buildings. The range of the system can be impacted by any obstruc-

tions blocking your signal. It is normal to see break up in the video going behind trees and other obstacles.

NOTICE: We do not recommend using the ultra micro FPV system in low light.

Display button

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

Pas de commentaire

Blade Nano QX FPV BNF Manuel d'instructions Page 16